Where networking and knowledge intersect.
Haris Hamidovic, CIA, ISMS IA, ITIL-F
Organizations have various ways of judging business success. In the public sector, one success criterion is quality of service to the citizens. In the private sector, growth of market share is a success measure. In all sectors, a condition for success is that business should continue to function in the face of fire, flood and other disasters. The discipline that ensures that the business can continue is business continuity management (BCM).1
In most organizations, the processes that deliver products and services depend on information and communication technology (ICT). Disruptions to ICT can, therefore, constitute a strategic risk, damaging the organization’s ability to operate and undermining its reputation. The consequences of a disruptive incident vary and can be far-reaching, and they may not be immediately obvious at the time of the incident.
In 2008, the British Standards Institution (BSI) released BS 25777:2008, Information and Communications Technology Continuity Management: Code of Practice, to help organizations plan and implement an ICT continuity strategy. BS 25777 gives recommendations for ICT continuity management within the framework of BCM provided by BS 25999-1:2006, Business Continuity Management: Code of Practice. This article provides an introduction to the key elements of ICT continuity based on BS 25777.
BCM is a relatively new management discipline that has become increasingly important given the turbulent environment in which organizations now find themselves.
The concept of business continuity was developed in the mid-1980s as new way of managing business risks. The basis of BCM is that the key responsibility of company directors is to ensure the continuation of business functionality at all times and under any circumstances.
BCM grew out of requirements in the early 1970s to provide computer disaster recovery for information systems (IS). Traditional disaster planning had concentrated on the restoration of facilities after a major incident such as the loss of a building or plant through fire or flood or the loss of computing or telecommunications throughout an enterprise. Disaster recovery plans, in general, are written on the basis of recovery after an event.
BCM is about prevention—it is not just a cure. It is not only about being able to deal with incidents when they occur and, thus, prevent crisis and subsequent disaster, it is also about establishing a culture within organizations that seeks to build greater resilience to ensure the continuity of product and service delivery to clients and customers.2
BCM is focused on entire business processes rather than on particular assets, such as IT systems, because, in order to operate, an organization must continue to execute its critical business processes. These processes may be contained within one business function, or they may integrate or impact a number of them. Recovery of IT systems alone will not keep such business processes running if staff do not have proper working conditions, if critical paper records have been destroyed, or if the organization cannot communicate with its customers and suppliers.3
Historically, business continuity planning (BCP) has resided in the IT department of most organizations. For this reason, most companies have some disaster recovery alternatives in place for their IT systems. The most common disaster recovery alternative used is offsite data storage, in which data are regularly backed up to tape or disk and kept at a remote location. Although several other technological alternatives for IT recovery are available, especially for larger corporations, such as hot and cold sites, electronic vaulting, shadowing, mirroring, and disk-to-disk remote copy, they are not used by many corporations. In this tough economic environment, it is very tempting to cut resources for BCP. Many enterprises mistakenly view BCP as an insurance policy for which they will likely never have to place a claim.4
ICT continuity supports the overall BCM process of an organization. BCM seeks to ensure that the organization’s processes are protected from disruption and that the organization is able to respond positively and effectively when disruption occurs. The organization sets out its BCM priorities, and within that context, ICT activities take place. ICT continuity ensures that required ICT services are resilient and can be recovered to the predetermined levels within the timescale required and agreed to by top management. Thus, effective BCM depends on ICT continuity to ensure that the organization can meet its objectives at all times (see figure 1), particularly during times of disruption.5
ICT continuity focuses not only on the likelihood and impact of disruptive incidents, but also on the ability of the organization to detect and respond to the occurrences of such incidents. This requires the organizations to monitor their ICT services to ensure that:6
ICT continuity processes and solutions are also intended to ensure that legal obligations (such as protecting personal and otherwise sensitive data) are not breached.
ICT continuity is based on six key principles:7
In a BCM context, the level of risk should be understood specifically in respect to the organization’s critical activities and the risk of a disruption to these. Critical activities are underpinned by resources such as people, premises, technology, information, supplies and stakeholders. The organization should understand the threats to these resources, the vulnerabilities of each resource, and the impact of a threat if it became an incident and caused a business disruption.
Which risk assessment approach is chosen is entirely the decision of the organization, but it is important that the approach is suitable and appropriate to address all of the organization’s requirements.
As a result of a business impact analysis (BIA) and the risk assessment, the organization should identify measures that:
These measures are known as loss mitigation and risk treatment. Loss mitigation strategies can be used in conjunction with other options, as not all risks can be prevented or reduced to an acceptable level.8
As part of its BCM program, the organization should categorize its activities according to their priority for recovery. Top management should agree on the organization’s business continuity requirements.
For each critical process, the organization needs to determine the longest amount of time the process can be unavailable before that unavailability threatens the survival of the business. This figure is known as the maximum tolerable downtime (MTD).
After the organization sets the MTD for each critical process, it needs to establish some specific recovery objectives for each process. The two primary recovery objectives that organizations set in a BIA are:
The organization should define its ICT services, and ICT service names should be meaningful to the organization.
The ICT services that are required to support achievement of the RTO for each critical activity, as prioritized by the BCM program, should be identified. The organization should document the list of critical ICT services, together with an RTO and RPO for each service. Some indication of the ICT service minimum capacity required at reinstatement and how quickly this capacity may need to be increased could also be necessary. The ICT service RTO should generally be less than the RTO for the critical activity it supports. (This may not be the case when the business continuity strategy calls for an interim measure, such as a manual procedure, instead of depending entirely on the ICT service.)
Top management should agree on the list of critical ICT services and their associated ICT continuity requirements. For each critical ICT service listed and agreed on by top management, the organization should describe and document the ICT components that make up the end-to-end service and how they are configured or linked to deliver each service. This analysis should consider physical and logical configurations. The normal ICT service delivery environment and the ICT continuity service delivery environment configurations should be documented.
The current continuity capability should be reviewed for each critical ICT service, from a prevention perspective, to assess risk of service interruption or degradation (e.g., single points of failure) and to highlight opportunities to improve ICT service resilience and, thus, the likelihood and/or impact of service disruption. It may also highlight opportunities to enable early detection and reaction to ICT service disruption. The organization can decide whether there is a business case to invest in identified opportunities to improve service resilience. This service risk assessment may also advise the business case for enhancing ICT service recovery capability.9
For each critical ICT service, the current ICT continuity service delivery environment configuration should be compared to the normal ICT service delivery environment, from a recovery perspective, to identify gaps or mismatches that may compromise ICT service recovery, such as inadequate data storage capacity.
Gaps identified among critical ICT service continuity capabilities and business continuity requirements should be documented. These gaps may indicate additional resources that each critical ICT service will require during recovery, but that are not already in place.
The organization should consider a range of options for each critical ICT service. The organization may include one or more or all of the following strategies.10
Business ContinuityContinuity strategies seek to improve the organization’s resilience to a disruption by ensuring critical activities continue at, or are recovered to, an acceptable minimum level and at time frames stipulated within the BIA.
AcceptanceA risk may be acceptable without any further action being taken. Even if it is not acceptable, the ability to do anything about some risks could be limited, or the cost of taking any action could be disproportionate to the potential benefit gained. In these cases, the response may be to tolerate the existing level of risk if top management deems the risk to be acceptable and within the organization’s risk appetite. In some circumstances, the impact of a risk may be outside the organization’s normal risk appetite, but due to the low likelihood of the risk occurring and/or the uneconomic cost of control, top management may accept the risk.
TransferFor some risks, the best response may be to transfer them. This may be done by conventional insurance or contractual arrangements, or it may be done by paying a third party to take the risk in another way. Risks may be transferred to reduce the risk exposure of the organization or because another organization is more capable of effectively managing the risks. It is important to note that some risks are not fully transferable; in particular, it is generally not possible to transfer reputational risk, even if the delivery of a service is contracted out.
Change, Suspend or TerminateIn some circumstances, it may be appropriate to change, suspend or terminate the ICT service, product, activity, function or process. This option should be considered only when there is no conflict with the organization’s objectives, statutory compliance or stakeholder expectation.
An organization’s ICT continuity plans cannot be considered reliable until exercised. An exercise program may involve a number of tests.
The organization should exercise not only the recovery of the ICT service, but also the service protection and resilience elements to determine whether:
The exercise is a businesswide activity and not just the domain of the ICT department. The ICT department may retain the planning and execution aspects of the exercise, but the organization still has a key role to play.
All activity is susceptible to disruption from internal and external events such as technology failure, fire, flood, utility failure, illness and malicious attack. ICT continuity provides the capability to react before a disruption occurs or on detection of one or a series of related events that become incidents, and to respond and recover when those incidents result in disruption.
ICT continuity is integral to ICT strategy and ICT service management, which align to organizational strategy. It is the element of ICT strategy and service management that enables an organization to continue to meet its goals and deliver its products and services when adverse conditions occur.
ICT continuity supports the overall BCM process of an organization. BCM seeks to ensure that the organization’s processes are protected from disruption and that the organization is able to respond positively and effectively when disruption occurs. The organization sets out its BCM priorities, and it is within this context that ICT activities take place.
ICT continuity management and BCM form an important part of effective management, sound governance and organizational prudence. Top management is responsible for maintaining the ability of the organization to continue to function in the face of disruption. Many organizations also have a statutory or regulatory duty to maintain effective risk-based controls, including BCM. BS 25777 will help any organization plan and implement an ICT continuity strategy within the framework of BCM as provided by BS 25999.
1 Her Majesty’s Stationery Office (HMSO), An Introduction to Business Continuity Management, UK, 19952 Sharp, John; The Route Map to Business Continuity Management: Meeting the Requirements of BS 25999, British Standards Institution (BSI), UK, 20073 Op cit, HMSO4 Rittinghouse, John; James F. Ransome; Business Continuity and Disaster Recovery for InfoSec Managers, Elsevier Digital Press, UK, 20055 British Standards Institution, BS 25777:2008 Information and Communications Technology Continuity Management: Code of Practice, UK, 20086 Ibid.7 Ibid.8 BSI, BS 25999-1:2006 Business Continuity Management: Code of Practice, UK, 20069 Op cit, BSI, BS 25777:2008 Information and Communications Technology Continuity Management: Code of Practice10 Op cit, BSI, BS 25999-1:2006 Business Continuity Management: Code of Practice
Permission to reproduce extracts from British Standards is granted by the British Standards Institution (BSI). No other use of this material is permitted. British Standards can be obtained in PDF or hard copy formats from the BSI online shop: http://shop.bsigroup.com or by contacting BSI Customer Services for hard copies only: Tel: +44 (0)20 8996 9001, E-mail: email@example.com.
Haris Hamidovic, CIA, ISMS IA, ITIL-Fis chief information security officer at Microcredit Foundation EKI Sarajevo, Bosnia and Herzegovina. Prior to his current assignment, Hamidovic served as IT specialist in the North American Treaty Organization (NATO)-led Stabilization Force (SFOR) in Bosnia and Herzegovina. He is the author of five books and more than 60 articles for business and IT-related publications. Hamidovic is a certified IT expert appointed by the Federal Ministry of Justice of Bosnia and Herzegovina and the Federal Ministry of Physical Planning of Bosnia and Herzegovina.
Enjoying this article? To read the most current ISACA® Journal articles, become a member or subscribe to the Journal.
The ISACA Journal is published by ISACA. Membership in the association, a voluntary organization serving IT governance professionals, entitles one to receive an annual subscription to the ISACA Journal.
Opinions expressed in the ISACA Journal represent the views of the authors and advertisers. They may differ from policies and official statements of ISACA and/or the IT Governance Institute® and their committees, and from opinions endorsed by authors’ employers, or the editors of this Journal. ISACA Journal does not attest to the originality of authors’ content.
© 2011 ISACA. All rights reserved.
Instructors are permitted to photocopy isolated articles for noncommercial classroom use without fee. For other copying, reprint or republication, permission must be obtained in writing from the association. Where necessary, permission is granted by the copyright owners for those registered with the Copyright Clearance Center (CCC), 27 Congress St., Salem, MA 01970, to photocopy articles owned by ISACA, for a flat fee of US $2.50 per article plus 25¢ per page. Send payment to the CCC stating the ISSN (1526-7407), date, volume, and first and last page number of each article. Copying for other than personal use or internal reference, or of articles or columns not owned by the association without express permission of the association or the copyright owner is expressly prohibited.